Home Page | Carton Machinery | High Speed Friction Feeder | Contact Us
PAKSMART Machinery is an Australian manufacturer and supplier of packaging machinery.
All Areas, NSW
Tel: (02) 9630 9464
Fax: (02) 9630 7348
Email: info@paksmart.com.au
7/12A Loyalty Road
North Rocks NSW 2151
Australia
Mon -Fri 9:00am - 6:00pm
PC15
Australian Designed
Packs 15 Cartons a Minute
| Machine Dimensions: | 2235mm long x 750mm wide |
| Speed: | Up to 15 cartons per minute. |
| Load: | Horizontal hand load. |
| Size Range: | Opening length | Opening width | Depth |
| Maximum | 254mm | 75mm | 250mm |
| Minimum | 20mm | 20mm | 75mm |
| Closure: | Via pressurised Nordson hot melt glue system with automatic glue guns |
| Power: | 415V AC 3 phase 20amps |
| Air: | 80 psi 5.5 bar |
The PC15 has top to bottom polycarbonate interlocked safety guards for operator safety.
Operation: Once the glue is at operating temperature and air is on, the operator enables the system via the control panel. The PC15 is now ready.
The operator places the hand erected and loaded carton into the load station. The action of placing the carton onto the PC15 closes the leading dust flaps. The operator must close the rear dust flaps in this action. Now with carton in the load station the operator cycles the system using the twin palm switches.
An AC motor drives flight lugs to take the carton past the inner major flap ploughs, glue is then applied to these flaps. The carton continues past the outer major flaps plough, the carton is now closed and placed into compression. The AC motor stops ready for the operator to place another carton into the load station.
